Wallcote E is approved by the U.S. Department of Agriculture for use in federally inspected meat processing locations. Wallcote E offers excellent resistance to chemical attack, staining, and abrasion. Wallcote W has greater stability to UV induced discoloration than Wallcote E, however both are resistant to UV induced degradation such as, chalking and embrittlement.
-Easy to clean and maintain.
-Does not embrittle with age. Resists impact chipping and flaking.
-Can be installed over a wide range of new and existing surfaces.
-Installed only by Professional Factory Trained Dex-O-Tex Contractors.
-Elongation ASTM D638 13%
-Surface Hardness ASTM D2240 Shore D 70-75
-Adhesion ASTM D952 Exceeds internal strength of backing systems
-Impact Resistance ASTM D2794 (Gardner Impact Tester) 44 in/lbs. on metal panel Direct - No loss of bond,
Reverse - No loss of bond
-Flexibility 1/8" Mandrel (180° Bend) No Cracking
-Cleanability TT-C-550a, Para. 3.3.4 Complies
-Recoat Time 8 hours at 70°F
-Flash Point (Tag Closed Cup)Exceeds 200°F
-Water Absorption MIL-D-3134, Para 4.7.8 70°F, 0.5% , 140°F, 1.7%
-Thickness, per coat 11 mils
-Microbial Resistance ASTM G21 Passes
-Chemical Resistance Call for seperate chart