Wall-Glas HD is a heavy duty 25 mil DFT three-component epoxy resin and hardener, and woven synthetic fiber reinforcement wallcoating system, which is designed to produce a seamless, dimensionally stable, hard tile-like glazed coating finish. It is impervious and offers excellent resistance to chemical attack, staining and abrasion; and it provides an extremely tough and durable finish coating. Wal-Glas HD is an ideal coating and reinforcing system, since it is a non-food source for bacteria and other microorganisms.
-Easily cleaned and decontaminated.
-Superior Chemical Resistance.
-Superior dimensional stability because of fiberglass reinforcement.
-Does not embrittle with age.
-Resists impact chipping and flaking.
-Available in a formulation that contains a biocide (Dexcide), which effectively controls growth of algae, bacteria, fungi, mildew, mold and yeast.
-Wall-Glas HD bonds well to any smooth, clean dry and sound substrate, including but not limited to, dry wall, green board, gypsum sheet rock, cement plaster, concrete, plywood, HD particleboard and cement backer board
-Installed only by Professional Trained Dex-O-Tex Contractors.
-Tensile Elongation ASTM D638 8%
-Impact Resistance ASTM.D2794 >70lbs/in2
-Adhesion ASTM D7234 (Elcometer) >400 psi
-Hardness ASTM D2240 Shore D 80-85
-Water Absorption MIL-PRF-3134 Para 4.7.8 <0.5%
-Chemical Resistance ASTM D1308 see Chemical Resistant Chart
-Microbial Resistance ASTM G21 Passes
-Pot-Life 20 to 25 Minutes @70°F
-Tack-Free 6-8 Hours
-Light Traffic 10-12 hours
-Normal Traffic 24 Hours
-Film Thickness 25 mils DFT
-Temperature Limits:
-Continuous 150°F
-Intermittent 200°F
-Fire Resistance ASTM E-84 Class A
-Volatile organic content (mixed components) 2 g/L
-Abrasion Resistance ASTM D4060 (CS17, 1000gr load, 1000 cycles) 0.0 gr loss max.
Downloads
Bookmark This Page
Print This Page
Email This Page