It is a three-component epoxy resin and hardener, and woven synthetic fiber reinforcement wallcoating system, which is designed to produce a seamless, dimensionally stable, hard tile-like glazed coating finish. Wall-Glas can be applied over gypsum wallboard, cement and gypsum plasters, concrete, concrete block, masonry, wood, metal and other sound surfaces.
-Easily cleaned and decontaminated.
-Superior Chemical Resistance.
-Superior dimensional stability because of fiberglass reinforcement.
-Does not embrittle with age.
-Resists impact chipping and flaking.
-Available in a formulation that contains a biocide, which effectively controls growth of algae, bacteria, fungi, mildew, mold and yeast.
-Wall-Glas bonds well to any smooth, clean dry and sound substrate, including but not limited to, dry wall, green board, gypsum sheet rock, cement plaster, concrete, plywood, HD particleboard and cement backer board.
-Installed only by Professional Factory Trained Dex-O-Tex Contractors.
-Tensile Strength ASTN D638 3,500 psi
-Tensile Elongation ASTM D638 8%
-Adhesion ASTM D952 Exceeds internal strength of backing.
-Hardness ASTM D2240 Shore D 80-85
-Water Resistance MIL-D-1044 16 mg
-Water Absorption MIL-D-3134 Para 4.7.8 <0.5%
-Microbial Resistance ASTM G21 Passes
Downloads
Bookmark This Page
Print This Page
Email This Page