VaporControl Primer 200 is a fluid-applied uniquely-modified epoxy moisture mitigation system. It is designed to be used as an above and below grade vapor retarder that is placed on the negative side (between the concrete slab and the impervious coating or surfacing) of the concrete substrate. As a vapor transmission suppression system VaporControl Primer 200 will withstand moisture vapor emission rates (MVER) of 10lbs/1000 sq/ft/24 hrs. It is recommended for use under impervious non-breathing flooring systems that cannot withstand moisture vapor transmission levels with MVER rates above the floor covering manufacturer's recommended levels.
-Excellent adhesion to damp concrete
-Convenient 3:2 by volume mix ratio
-High compressive, flexural and tensile strengths
-Installed only by professional Factory Trained Dex-O-Tex Contractors
-Compressive Strength ASTM D695 12,000 psi
(907 kg/cm2)
-Tensile Strength ASTM D638 4,200 psi
-Tensile Elongation ASTM D638, percent 2.7%
-Microbial Resistant ASTM G21 Passes
-Alkaki Resistant ASTM D1308 Resistant
Downloads
Bookmark This Page
Print This Page
Email This Page