Tek-Crete Troweled is a urethane mortar flooring system, which is designed for monolithic application at 1/4" (6,3mm) to 3/8" (9,5mm) thickness. It provides superior performance in areas which are excessively abusive (repetitive impact, abnormal wear, chemical, heat, wet) areas where other flooring systems, such as acid brick, quarry tile, ceramic tile and most polymer flooring systems fail.
-Negligible odor during installation and cure.
-Rapid cure and rapid return to service.
-Unaffected by high temperature and high temperature spills, up to 325oF (163oC).
-Same chemistry topcoat available to cover surface irregularities and outgassing pinholes.
-Alternative textured surface profiles available ranging from mild to extreme aggressiveness.
-Resistant to algae, bacteria, fungi, mold and mildew (does not promote microbial growth).
-Installed only by Professional Factory Trained Dex-O-Tex Contractors.
-Tensile Strength ASTM C307, min 1,000 psi
-Flexural Strength ASTM C790, min 2,000 psi
-Hardness ASTM D2240, Shore D 80-85
-Thermal Coefficient of Linear Expansion ASTM C531 (in/in/oF) 1.4X105
-Density ASTM C905, lbs/ft.3 130
-Water Absorption MIL-D-3134 0.64%
-Flammability ASTM E648 1.07 watts/cm2
-Adhesion ASTM D4541 400 psi
-Temperature Distortion Crossfield Lab Passes
-Microbial Resistance ASTM G21 Passes
-Chemical Resistance (See Chemical Resistant Chart)
Downloads
Bookmark This Page
Print This Page
Email This Page