Tek-Crete SL is a urethane concrete flooring system, which is designed for monolithic application at 3/16" (4,75mm) to 1/4" (6,3mm) thickness. It provides superior performance in areas, which are excessively abusive (repetitive impact, abnormal wear, chemical, heat, wet) areas where other flooring systems, such as, acid brick, quarry tile, ceramic tile and most polymer flooring systems fail.
-Excellent chemical resistance.
-Negligible odor during installation and cure.
-Rapid cure and rapid return to service.
-Unaffected by high temperature and high temperature spills, up to 3250F (1630C).
-Same chemistry topcoat available to cover surface irregularities and outgassing pinholes.
-Alternate textured surface profiles available providing different degrees of slip resistance, ranging from mild to extreme aggressiveness.
-For superior slip resistance in a slurry system, see Tek-Crete SL QC or Tek-Crete SL B.
-Resistant to algae, bacteria, fungi, mold and mildew (does not promote microbial growth).
-Installed only by Professional Factory Trained Dex-O-Tex Contractors.
-Tensile Strength ASTM C307 1,000 psi
-Flexural Strength ASTM C790 2,000 psi
-Hardness ASTM D2240, Shore D 80-85
-Thermal Coefficient of Linear Expansion ASTM C531 (in/in/0F) 1.4x105
-Density ASTM C905, lbs/ft.3 130
-Water Absorption MIL-D-2134 0.64%
-Flammability ASTM E648 1.07 watts/cm2
-Adhesion ASTM D4541 400 psi
-Temperature Distortion Crossfield Lab Passes
-Microbial resistance ASTM G21 Passes
Downloads
Bookmark This Page
Print This Page
Email This Page