Tek-Crete SL CQ is a quartz broadcast finished urethane concrete flooring systems designed for monolithic application at 1/4" (6.3 mm) thickness. It functions when subject to excessively abusive (impact, wear, chemical, heat, wet areas) areas where other flooring systems fail, such as, acid brick, quarry tile, ceramic tile and most polymer flooring systems fail.
-Excellent chemical resistance
-Minimal Odor during installation and cure
-Rapid cure and rapid return to service
-Unaffected by high temperature and high temperature spills up to 275°F (135°C), lower limits vs. other Tek-Crete Systems because of the epoxy
-Multiple textured surface profiles available providing different degrees of slip resistance, ranging from mild to extreme aggressiveness
-Resistant to algae, bacteria, fungi, mold and mildew (does not promote microbial growth)
-Installed only by Professional Factory Trained Dex-O-Tex Contractors
-Tensile Strength ASTM C307 1,000 psi
-Flexural Strength ASTM C790 2,000 psi
-Hardness ASTM D2240, Shore D 80-85
-Thermal Coefficient of Linear Expansion
ASTM C531 (in/in/°F) 1.4x105
-Density ASTM C905, lbs/ft3 130
-Water Absorption MIL-D-2134 0.64%
-Flammability ASTM E648 1.07 watts/cm2
-Adhesion ASTM D4871 >400 psi
(100% failure in concrete substrate)
-Temperature Distortion Crossfield Lab Passes
(dry, wet and oil at 250°F or 121°C)
-Microbial resistance ASTM G21 Passes
-Chemical Resistance (See Chemical Resistant Chart)
Downloads
Bookmark This Page
Print This Page
Email This Page