Tek-Crete SL CF is a urethane mortar flooring systems that utilizes decorative colored PVC chips to enhance the appearance of the typical industrial floor. It is installed at 1/4" (6.3mm) thickness. This aesthetically enhanced systems function in excessively abusive (impact, wear, chemical, heat, wet) areas where other flooring systems fail, such as, acid brick, quarry tile, ceramic tile and most polymer flooring systems fail.
-Excellent chemical resistance
-Minimal odor during installation and cure
-Rapid cure and rapid return to service
-ADA Compliant, to in-situ validate ADA Compliance use the English XL Variable Incident Tribometer Machine
-Skid-Resistant - An array of skid-resistant surface textures available
-LEED (Leadership in Energy and Environment Design)
-Credit Points may be available under 5 different Classifications
-Resistant to algae, bacteria, fungi, mold and mildew (does not promote microbial growth)
-Installed only by Professional Factory Trained Dex-O-Tex Contractors
-Tensile Strength ASTM C307 1,000 psi
-Flexural Strength ASTM C790 2,000 psi
-Hardness ASTM D2240, Shore D 80-85
-Thermal Coefficient of Linear Expansion
ASTM C531 (in/in/°F) 1.4x105
-Density ASTM C905, lbs/ft3 130
-Water Absorption MIL-D-2134 (Para. 4.6.5) 0.64%
-Flammability ASTM E648 1.07 watts/cm2
-Adhesion ASTM D4891
(100% failure in concrete substrate) >400 psi
-Temperature Distortion Crossfield Lab
(dry, wet and oil at 250°F or 121°C) Passes
-Microbial resistance ASTM G21 Passes
-Chemical Resistance (See Chemical Resistant Chart)
Downloads
Bookmark This Page
Print This Page
Email This Page