Quik-Glaze FC is a state of the art, high solids, and UV stable, aliphatic elastomeric polyurea. Quik-Glaze FC displays a low odor during placement and cure. It offers fast turnaround times. Unlike most commercially available polyureas Fast-Dry does not require the use of plural component spray apparatus, Quik-Glaze FC has been specially formulated to have a working time of 20 minutes with a hard dry in 1.5 hours at 700F (210C). It is available in clear and pigmented.
When fully cured, Quik-Glaze FC will provide added durability to most types of floors such as Decor-Flor, Micro-Topping, Stamp-Cote, Tek-Crete, Elastatex 500, Colorflake, stained concrete and many more. Quik-Glaze FC’s properties make it one of the very best sealers for maintaining and preserving elaborate decorative finishes.
Quik-Glaze FC is extremely color stable and displays excellent UV weathering characteristics.
-Fast cure.
-High tear strength.
-Excellent abrasion resistance.
-Excellent Chemical Resistance
-Displays excellent UV resistance.
-High gloss finish.
-Installed only by Professional Factory Trained Dex-O-Tex Contractors.
A. Tear Strength ASTM D624, Die C........ 879 lbs/in
B. Flexibility ASTM D1737** Passes
180 degree bend, 1/8” Mandrel
C. Tensile Strength ASTM D412........ 4,700 psi
D. Tensile Elongation ASTM D412........ .. 80%
E. Taber Abrasion ASTM D4060........ 8 mg loss
(CS17 Wheel, 1000g Load, 1000 Cycles)
F. Impact Resistance ASTM D2794, Direct........ 160in/lbs
Reverse................. 160in/lbs
G. Hardness ASTM D2240 Shore A........ 85-90
H. Solid Percent by Weight (calculated)........ 99.9%
I. Gloss ASTM D523........ 88+
J. Dry Time 50% relative humidity........ Surface Dry 1.5 hrs
Hard Dry 2.0 hrs
K. Pot Life 50% relative humidity........ 20 min
L. Coefficient of Friction ASTM D2047........ 0.67 dry
(slip resistance with leather footwear)................. 0.82 wet
M. Microbial Resistant ASTM G21........ Passes Rating 1
Downloads
Bookmark This Page
Print This Page
Email This Page