1. Monolithic, including integral base where specified.
2. Resistant to many chemicals (see Chemical Resistance Chart).
3. Can be installed over wide range of new and existing surfaces with excellent adhesion.
4. No toxic odors during installation.
5. Low burning rate and negligible smoke production.
6. Installed only by Professional Factory Trained Dex-O-Tex Contractors.

1. Compressive Strength ASTM C109 5,450 psi
2. Resistance to Heavy Rolling Load Crossfield Products Corp. Test Standard #1-39T Dry - .002" indentation (.051 mm), Wet - .005" indentation (.127 mm)
3. Surface Hardness ASTM D2240 80
4. Indentation Characteristics (Steadily Applied Load) MIL-D-3134, Para. 4.7.4.2.1 (2000 Lbs. on 1" steel ram Imposed for 30 minutes) 1.04%
5. Indentation Characteristics (Impacted Load) MIL-D-3134, Para. 4.7.3 (2 Lb. (908 kg.) steel ball dropped 8 foot (2.4 m) height 0.034" indentation
6. No cracking or loosening 0.8636 mm
7. Adhesion MIL-D-3134, Para. 4.7.14 301 psi
8. Tensile Strength ASTM C190 890 psi (62.63 kg/cm2)
9. Flammability, NFPA Test Method 253-84 Specific Optical Density (DM) 1.07 watts/cm2
10. Flammability, NFPA Test Method 258-89 Thermal exposure Flaming 110.7
11. Resistance to Elevated Temperatures MIL-D-3134, Para. 4.7.5.1 No flow or slip
12. Slip-Resistance (Coefficient of Friction) Varies depending upon surface texture selected
13. Abrasion Resistance ASTM C501 30.4 Wear Index
14. Coefficient to Thermal Expansion ASTM C531 2.82 x 10-6
15. Flexural Strength ASTM C790 2500 psi
16. Water Absorption MIL-D-3134, Para. 4.7.8 2.18%
17. Electrical Conductivity Dielectric
18. Chemical Resistance (See Chemical Resistance Chart

• Media Centers
• School Locker Rooms and Restrooms
• Control Rooms
• Plant Locker and Shower Rooms
• Shower Rooms