Dex-O-Tex Neobond is a composite system consisting of a proprietrary Neoprene rubber emulsion waterproofing membrane with a fabric reinforced cementitious protection layer. It is designed for use beneath ceramic tile, marble, quarry tile, and certain types of troweled composition flooring. It can also be used for between slabs or below grade waterproofing applications. It is applied to substrates and molded up onto bases, over curbs, etc. without the use of any adhesive other than its own composition.
-Crack Isolation. Reduces reflective racking from the substrate to the final finish due to minor cracking in the substrate
-Forms a monolithic tightly adhering molded membrane across floors and up bases, curbs, etc.
-Thin section. No depression of slab required
-Can be applied over new or existing surfaces
-Environmentally safe. Contains no Organic solvents, and is VOC compliant
-Installed only by Professional Factory Trained Dex-O-Tex Contractors
-Tensile Strength Ceramic Tile Inst. SE S763 Dry 46 psi
Wet 50 psi
-Breaking Strength ASTM D751 265 psi
-Elongation Fabric Reinforced ASTM D751 50.5%
-Hydrostatic Pressure Resistance ASTM D751
Method A, Procedure 1 240 psi
-Ozone Resistance ASTM D1149
(72 hrs @ 100 ppm No cracking, 90°F plus hydrostatic crazing or waterFHA 4900.1) penetration
-Dimensional Stability ASTM D1204 <0.5%
-Indention Resistance FMA 4900.1, Sect. 615-5 No water (shower pans) penetration
-Puncture Resistance FMA 4900.1, Sect. 615-5 No water (shower pans) penetration
Downloads
Bookmark This Page
Print This Page
Email This Page