It is a multi-layered troweled applied floor designed for use as a waterproofing system for mechanical equipment rooms above occupied areas. The material is applied in individual troweled layers, which form, successively, an elastic latex waterproof membrane, an integral waterproof base turned up at walls and equipment pads, and a durable finished floor.
-Can be applied over new or existing surfaces.
-Environmentally safe. No toxic odor or flammable hazard during installation.
-Installed only by Professional Factory Trained Dex-O-Tex Contractors.
-Elongation Wet, Breakload Wet 31.0%, 67 lbs per inch
-Strip Adhesion Strip adhesion measured in per linear inch force required to pull up membrane. 19.2 tbs. per inch
-Indentation Characteristics MIL-D-3134, Para. 4.7.3 (Steadily Applied Load) (2000 lbs. on 1" steel ram imposed for 30 minutes) < 5%
-Indentation Characteristics MIL-D-3134, Para. 4.7.3 (Impacted Load 2 lb. Steel bal dropped from 8 foot height) No cracking or loosening
-Resistance to Elevated Temperatures MIL-D-3134, Para. 4.7.5.1 No flow or Slip
-Slip Resistance (Coefficient of Friction) Varies depending upon surface texture selected.
Downloads
Bookmark This Page
Print This Page
Email This Page