Flex-Glaze Vertical Surface Membrane Flexible Membrane System is applied in two or three membrane coats at 10 mils each for a total wet-film-thickness of 20 to 30 mils. It can be applied over gypsum wallboard, cement and gypsum plasters, concrete, concrete block, masonry, wood, metal and other sound surfaces.
-Seamless surface and continuous membrane
-Superior Chemical Resistance.
-Does not embrittle with age.
-Available with a proactive biocide.
-LEED (Leadership in Energy and Environmental Design) Credit Points may be available under 5 different Classifications.
-Does not contain chemicals targeted by Green Seal Standard GS-11 and LEED-CS as unacceptable.
-Installed only by Professional Factory Trained Dex-O-Tex Contractors.
-Tensile Strength ASTM D412 1250 psi
-Tensile Elongation ASTM D412 125%
-Adhesion ASTM D4541 Exceeds internal strength of backing (cement Board, drywall, concrete, concrete and CMU block)
-Hardness ASTM D2240 Shore D 30-45
-Thermal Cycling ASTM C884 No Delamination
-Water Absorption MIL-PRF-3134 Para 4.7.8 <0.5%
-Chemical Resistance ASTM D1308 (See Chemical Resistant Chart)
-Flammability ASTM D635 Self Extinguishing over concrete
-Microbial Resistance ASTM G21 Passes #1