Dex-O-Cote WB Water-Based Epoxy Coating can be applied smooth or as a moderate skid resistant epoxy coating over concrete or Dex-O-Tex composite floors, as well as stairs, ramps and other surfaces requiring an epoxy coating system.
For moderate skid resistance a forth component, Dex-O-Tex Synthetic Aggregate, can be added.
It can be finished with optional topcoats of Dex-O-Tex Posi-Tred CR when subjected to extremely harsh chemical exposure or Quik-Glaze a highly chemical and abrasion resistant polyurea topcoat.
Dex-O-Cote WB is often used in conjunction with Dex-O-Tex wall systems to produce a complete integrated seamless protection envelope for seamless floor and wall system.
Where to Use
The intended use ranges from dry to wet environments in commercial, industrial and institutional areas, such as manufacturing, processing, warehousing, stairs, ramps, walkways, corridors and commons-areas. The material can be applied over new or existing concrete or Dex-O-Tex composition floors or metal or wood sub-surfaces (Consult Crossfield for detailed specification for metal or wood surfaces).
-No significant odor during installation.
-Resists most common chemical spillage.
-Tools easily cleaned with water
-Profile selection from smooth to moderately aggressive.
-Installed only by Factory Trained Contractors.
-Crossfield offers a Limited Supplemental Warranty of ten years against moisture vapor suppression disbondment of Dex-O-Cote WB systems when used over VaporControl TM Primer 100. Contact Crossfield for additional information.
-Tensile Strength ASTM D638........................... 4,400 psi (Resin & Hardener).........................................(310 kg/cm2)
-Tensile Elongation ASTM D638....................... 4,400 psi (Resin & Hardener..........................................(310 kg/cm2)
-Surface Hardness ASTM D2240 Shore D................75-80
-Indentation Characteristics (Steadily Applied Load) MIL-D-3134,................... 0.005" Para. 4.7.4.2.1, 2000 lbs on............................. (0.127 mm) 1" steel ram imposed for 30 minutes over a concrete substrate, indented H. Indentation Characteristics (Impact Load) MIL-D-3134, Para.4.7.3.................. 0.011" (2 lb. .908 kg.) Indent from steel ball.................. (0.28 mm) dropped twice from 8 ft. height
-Adhesion ASTM D4541...................................... > 400 psi (100% failure in concrete).............................. (28.1 kg/cm)
-Water Absorption MIL-D-3134........................................................... < 1.0%
-Abrasion Resistance ASTM D4060 (CS17, 1000gr load, 1000 cycles)... 0.09 g
-Flammability ASTM D635................ Self-Extinguishing Bonded to Concrete
-Skid Resistance Varies depending upon surface texture selected. (See Crossfield Skid Resistance Characteristic)
-Microbial Resistant ASTM G21..............Passes Rating 1
-Chemical Resistant (see Chemical Resistance Chart)
Downloads
Bookmark This Page
Print This Page
Email This Page