Find a Rep
Email Us
Architect Login
Your email:
Password:
Contractor Login
Your email:
Password:
Login as a Rep     Need Contractor Access?
Request a Quote
Contractor Access
Email This Page
Your email:
Your friend’s email:
Add to Materials

N

Name

Action
Conductive Cheminert K
It is a trowel-applied epoxy flooring system, which is conductive (2.5 to 106 ohms or 25,000 to 1,000,000 ohms) and non-sparking. Applied in a series of coats, the total thickness of the floor is 3/16" (4,75mm) to 1/4 " (6,35 mm). It forms a seamless floor, which can be readily applied to form an integral coved base. All materials are quality controlled and factory pre-tested prior to shipment. It is supplied in unit form ready for precise mixing at the time of application. Available in black only.

Typical Uses: Flooring for ammunition plants, arsenals, explosion hazardous industrial service, various other military uses, hospital operating suites, hazardous corrosion handling areas, etc.

Product Technical Data Sheet

-Electrically conductive and non-sparking.

-Factory pre-engineered and pre-packaged system.

-Pre-tested for conductivity.

-Seamless floor, including integral coved base.

-Good general chemical resistance.

-Installed only by Professional Factory Trained Dex-O-Tex Contractors.

-Electrical Conductivity NFPA #56 Complies

-NFPA #99 Complies

-*U.S. Army AMCR 385-100 Complies

-*U.S. Army NAVSEA OP-5 *includes non-sparking compliance Complies

-Electrical Transmission Properties 2.5E4-1E6 ohms Point-to-Point and Point to Ground resistance per ESD 7.1. Conductive (CD)

-Compressive Strength ASTM D695 21,600 psi

-Surface Hardness ASTM D2240, Shore D 82

-Tensile Strength ASTM D638 6,680 psi

-Tensile Elongation ASTM D638 5.9%

-Flexural Strength ASTM D790 Flexural Yield Strength 12,200 psi

-Modulus of Elasticity ASTM D790 4.1 x 104

-Adhesion ASTM D4541 >400 psi (100% concrete failure)

-Abrasion Resistance ASTM D4060 0.04 gr (CS17, 1000gr load, Cycles)

-Microbial Resistance ASTM G21 Passes

Quick Links
  Downloads
  Bookmark This Page
  Print This Page
  Email This Page
  Request Quote