A high density, fluid applied 1/8" (3,17mm) seamless flooring system. It is comprised of an epoxy and pre-engineered specialty aggregate. It can incorporate an integral sanitary coved base. Cheminert HD is resistant to a wide range of acids, alkalis, solvents and food byproducts.
Typical Uses: Chemical/Solvent Storage; Secondary Containment; Battery Storage; Plating Areas; Trenches; Chemical Spillage Areas.
-Resistant to many chemicals. (see Chemical Resistance Charts).
-Produces a rapidly installed seamless floor at moderate cost. A Cheminert HD installation may be placed in service within 24 hours in cases where preparation work is minimal.
-Installed only by Professional Factory Trained Dex-O-Tex Contractors.
-Compressive Strength ASTM D695 11,000 psi (Resin and Hardener)
-Tensile Strength ASTM C307 1,600 psi (Resin, Hardener and Aggregate)
-Tensile Strength ASTM D638 3,300 psi (Resin and Hardener)
-Flexural Strength ASTM C580 4,300 psi
-Bond Strength ASTM D4541 >400 psi (100% concrete failure)
-Indentation Characteristics (Impacted Load) MIL-D-3134, Para. 4.7.3 (2 lb. Ball dropped twice from 8 ft. height) No chipping, cracking, loss of adhesion, Indentation 0.024" Gardner Impact Tester, 160 in/lbs. No cracking or detachment. Indentation 0.014"
-Abrasion Resistance ASTM D4060 0.04 gr (CS17, 1000gr load, Cycles)
-Flammability ASTM D635 Self-extinguishing by this test (0.6")
-Water Absorption MIL-D-3234 0.3%
-Surface Hardness ASTM D2240 Shore D 80-85
-Microbial Resistance ASTM G21 Passes
-Chemical Resistance (see Chemical Resistance Chart)
Downloads
Bookmark This Page
Print This Page
Email This Page