Chem-Rez N Slurry/Broadcast is a seamless 1/8" to 3/16" chemical and heat resistant novolac epoxy and pre-engineered flooring system. It has superior physical and mechanical properties vs. conventional epoxy floors, since it is formulated to produce a higher "cross-linking". Greater cross-linking creates a product that resists chemical attack from a very wide range of acids, alkalis and solvents. In addition, it sustains temperatures up to 250º F (120º C) and intermittent temperatures up to 350º F (178º C).
-Available in textures from smooth to aggressive.
-Superior chemical and heat resistance.
-A waterproofing and crack isolation membrane can be installed prior to system application.
-Installed only by Professional Factory Trained Dex-O-Tex Contractors.
-(Resin, Hardener and Aggregate) (738 kg/cm2)
-Compressive Strength ASTM D695 12,000 psi
-(Resin and Hardener) (907 kg/cm2)
-Tensile Strength ASTM C307 1,500 psi
-(Resin, Hardener and Aggregate) (127 kg/cm2)
-Tensile Strength ASTM D638 4,400 psi
-(Resin and Hardener) (310 kg/cm2)
-Flexural Strength ASTM C580 4,000 psi (281 kg/cm2)
-Indentation Characteristics: (Steadily Applied Load) MIL-D-3134 0.005"
-Para. 4.7.4.2.1, 2000 lbs. on 1" steel ram Imposed for 30 minutes over a concrete substrate, indented. (0.127 mm)
-Indentation Characteristics MIL-D-3134 Para 4.7.3
-(Impact Load) 0.011"
-(2 lb .908 kg.) Indent from steel ball dropped twice from 8 ft. height. (0.28 mm)
-Adhesion ASTM D4541 >400 psi (100% concrete failure)
-Water Absorption MIL-D-3134 <1.0%
-Abrasion Resistance ASTM D4060 0.04 gr (CS17, 1000gr load, Cycles)
-Flammability Self-Extinguishing
-ASTM D635 Bonded to concrete
-Slip Resistance Varies depending upon surface texture selected. See Crossfield for Slip Resistant Characteristics).
-Microbial Resistance ASTM G21
-Chemical Resistance (See Chemical Resistance Chart)
Downloads
Bookmark This Page
Print This Page
Email This Page